Tally Customer Support

Very Impressive !!!

In our office we use Tally 7.2 and because of some technical problems I had to call Tally Customer Support couple of times and they were able to solve my problems in minutes….

First I had faced problems at the time of upgrading from 6.3 to 7.2, just called them up, had to wait for 20-25 minutes on the phone but finally someone from their side picked up the phone….I heard a very sweet voice from other side and it made remember about ICICI, they have people with very sweet voice but they are never helpful…haha

But I was wrong this time, she asked for few details and then suddenly told me, go to D drive, go to this folder and you will find one file there…just edit it and replace it with this…your tally should work fine now..

I was shocked….thinking how the hell she knows where is my Tally installed but then later realized that, yes they have some web activation system in 7.2 and that might be sending all info….

But whatever it is, she solved my problems in minutes…

2nd time was recently, when one company’s data file was crashed…

We called up our local vendor first, he gave some instructions on the phone, but nothing happened….we were worried about loosing the data, the backup we had was 3-4 days old…..

We called up Tally customer support, this time it took less time and again I heard a very sweet voice…but this time I was confident that my problem will get solved….and she managed to fix the problem…

I talked to her for around 15-20 minutes on the phone, tried few things and finally we got our data back, only few entries were lost but that is ok compared to loosing whole data…

So moral of the story, they rock….very good software and very impressive customer support…just need to make sure that customer wait time is less… :)



Category : Customer Support .
Date : June 5, 2005 | RSS 2.0. | trackback

112 Responses

    vinay says
    13-Dec-2005 at 11:22 am

  1. can I able to run tally 6.3 &7.2 in windows XP machine
    &
    what is recommended configration for tally server

    2. Deep says
    13-Dec-2005 at 11:48 am

  2. We were using tally as server on XP machine…we had not faced any problems at all..

    Deep

    3. mahesh says
    22-Dec-2005 at 7:29 pm

  3. you can install Tally in Xp system, but you may only face the problem in printing in Dos mode as you cant make Custom page settings for DOT matrix printers in XP.

    4. asif khan says
    21-Jan-2006 at 3:06 pm

  4. I m using your tally 7.2 from 4th of april 2005. I worked in it till 3rd of jan 2006. But one day when I opened tally, I saw It was showing my work till 4th august 2006. Tell me what should I do.

    5. S.Nikhil says
    24-Jan-2006 at 1:59 pm

  5. If we open tally 7.2 the message could not load library import arrives. Please suggest a solution to it as early as possible.

    6. neeraj sagar says
    04-Feb-2006 at 8:17 pm

  6. hi i am a user of tally 7.2 multiuser what the problem i am facing that usually tally on client machine bacomes educational and gives a massege unable to get licence from licence server. we called up a local vender’s engg for it and he did something but could not solve the problem and said your window has currpedt so you have to formate still we are facing this problem i want to know whether he was right on his statement can it possible .
    [plz suggest me as soon as possible

    7. aravinda says
    12-Feb-2006 at 6:47 pm

  7. i want the short cut in tally

    8. ANIRUDH SINGH CHAUHAN says
    14-Feb-2006 at 1:19 pm

  8. PLEASE HELP ME i AM UNABLE TO RUN TALLY 7.2 ON WINDOWS 2003 SERVER. MY CLIENT PC SHOWS MESSAGE ” LICENCE SERVER IS NOT ACTIVATED” BUT IN BROWSER IS SHOW “TALLY SERVER IS RUNNING”
    HELP ME WHAT TO DO.
    I HAVE INSTALLED THE TALLY WITH ADMINISTRATIVE RIGHTS.

    REGARDS,
    ANIRUDH

    9. Lisa says
    22-Feb-2006 at 2:06 pm

  9. I have tally7.2 release 3. I have facing some problem to entry in Goods Receipt Not & Delivery Note when I enty in Item lebel Ledger’s Name comes. I want to Item Name. Why this problem I donot Know?
    Please Solve this problem.

    Thanking you,

    10. arvind kumar says
    13-Mar-2006 at 4:59 pm

  10. i have tally7.2. i am facing problem while making contractor’s payment. please do help me

    thanking you

    11. Alok Kumar says
    15-Mar-2006 at 1:59 pm

  11. Hi
    i am using tally 7.2 i forgotten the password used for accessing companies data…
    Can any plz help me how to get the password back or nullify the password so that i can see the data of that company

    12. Zellweger-Uster user says
    17-Mar-2006 at 11:19 pm

  12. Tally starts up well but does not quit on XP sp2. Just does not show the yes/no confirmation when it should. Looks like that box is hidden under the main window. Re-installed XP with SP2, deleted the old Tally folders, installed a fresh 7.2.3 but still the same problem. Have to end task to quit. Changed the permissions for the Tally folders to Everyone - Full Control, updated VGA drivers and even tried the Compatibility Mode for Tally.exe but no luck. Any one had this problem and solved it?

    13. Adi says
    21-Mar-2006 at 2:27 pm

  13. Hi
    One of my friend is using tally7.2 and using 9 pin and 24 pin epson printers to print the reports. layout is entirely different in these 2 different printers, 24 pin prints fine but the layout and quality of the characters are very low in 9 pin printer.
    Is 9 pin printer not recommanded for printing?

    14. PRASAD says
    22-Mar-2006 at 10:31 pm

  14. TALLY IS A VERY GOOD SOFTWARE I HAVE USED BUT WHY IS TALLY SO SLOW IS THERE A SOLUTION FOR THIS I HAVE 7000 TRANSACTIONS AND 250 LEDGERS 750 STOCK ITEMS AND ABOUT 8000 BATCHES CAN U PLEASE GIVE A SOLUTION FOR THIS.

    15. pinky says
    23-Mar-2006 at 9:30 am

  15. How can i recover my crashed data in tally 7.2 . can ne1 plz tell me how?

    16. pinky says
    23-Mar-2006 at 9:38 am

  16. Dear Deep
    PLease tell me how to recover a crashed data file in tally 7.2, I am facing the same problem that u have mentioned in ur article.

    17. Suraj says
    23-Mar-2006 at 10:01 am

  17. i have date changing problem in tally 7.2 and tally 6.3.
    I am able to change date from 1 and 2 only and could not make it to 3 and further.

    18. Deep says
    23-Mar-2006 at 10:39 am

  18. Pinky…you have to call up tally customer support guys, they will ask you to run some cammands to recover the data..

    19. Narasimha Rao says
    23-Mar-2006 at 10:51 am

  19. Dear sir when we prepare a report in tally and save it it is creating a folder on desktop and saving in it insted of saving in d: what is the solution waiting for reply thanking you Narasimha Rao

    20. pinky says
    23-Mar-2006 at 11:45 am

  20. Dear deep
    The problem i have is that my tally is an unlicensed version so i cannot call the tally supprot staff.
    plz let me know the procedure

    21. Deep says
    23-Mar-2006 at 11:49 am

  21. I dont have any any idea about the commands :(

    22. pinky says
    23-Mar-2006 at 11:56 am

  22. dear deep
    tell me do u know how to rewrite books in tally 7.2

    23. BABURAO says
    23-Mar-2006 at 2:05 pm

  23. THERE ARE 13300 VOUCHERS, 240 GROUPS AND 2648 LEDGER ACCOUNTS. THE PROBLEM I AM FACING IS THAT WHENEVER THE RECONCILITATION DATES ARE FED IN THE BRS SCREEN AND TRY TO SAVE, IT IS TAKING HOURS TOGETHER WITH NO CERTAINITY OF THE VOUCHERS GETTING SAVED.
    CAN ANYBODY HELP ME WITH THIS PROBLEM

    24. So who am I? says
    24-Mar-2006 at 1:22 am

  24. [...] I am confused between these choices…Ekta Kapoor, Himesh Reshammiya, Mandira Bedi, Hutch Customer Support Guy, Tally Customer Support Guy or Deep Ganatra. [...]

    25. rajesh says
    28-Mar-2006 at 11:37 am

  25. when i restore backup tally 6.3 error given( INSERT DRIVE 1 IN DISK)
    both cdrom & any other drive

    26. sanjay says
    29-Mar-2006 at 8:16 am

  26. please i want to know about the tally 7.2 codding software book information, which can be used in coding for the other reporting for tally 7.2 for extra report using the . ini files please guide me for such a book

    27. Mohinder Sharma says
    30-Mar-2006 at 9:41 am

  27. I have Tally 7.2 software, but username and passward
    can’t know due to some reasons, how I make new
    username and passward to work smoothly.

    Mohinder Sharma

    28. Manish Shukla says
    31-Mar-2006 at 10:43 am

  28. I have Tally 6.3 silver (Single User), but user name & Password can’t know due to some reasons. How i make new username and password to work without lost of data for tha same company.

    29. sachin says
    31-Mar-2006 at 6:40 pm

  29. memory access violation when i m saving my voucher entries

    30. navdeep bansal says
    02-Apr-2006 at 10:08 am

  30. i am able to change date 1 and 2 only in tally 7.2 can i able to change date 3 and above plz help me as soon as pssible i shall be vry thankful to you for this

    31. delphin says
    02-Apr-2006 at 11:36 am

  31. We have licence version tally 6.3 software but today that one macking problem.the tally showing educational version how can i slove this problem

    32. shafi says
    04-Apr-2006 at 2:54 pm

  32. when i opening tally i recieived an error message (internal erroe c0000005 memory access voilation ) what can i do for this

    33. Virendra Sharma says
    04-Apr-2006 at 4:50 pm

  33. I have Tally 6.3 silver (Single User), but user name & Password can’t know due to some reasons. How i make new username and password to work without lost of data for that same company.

    34. Bhushan limaye says
    05-Apr-2006 at 12:56 pm

  34. I am Bhushan Limaye
    My tally 7.2 multiusers package install a old computers i have cannot surrender my tally at my old computers because these computers have not a actived Online internet surport so i have another types surrender option you suggest plz . reply me my yahoo ID ( yogesh2175@yahooco.in)

    35. saibaba says
    05-Apr-2006 at 3:42 pm

  35. I am using Tally 6.3, Now i want to change the current user name and password, how can i change the user name and password.
    please help me.

    36. Rama Krishna says
    05-Apr-2006 at 4:22 pm

  36. Hello ,we have tally 7.2 multiuser and win 98 is a client OS and windows 2000 server with TAlly lock.Now we upgraded some systems to XP.In windows XP the problem i am facing that after installation of tally i can able to login and logout for the first time but once i restarted the system i am not getting the connection.if again install and configured tally then only iam getting the connection.It is showing the serial number but not connected to the server.

    37. Harsha says
    06-Apr-2006 at 2:27 pm

  37. Hi
    i am using tally 7.2 i forgotten the password used for accessing companies data…
    Can any plz help me how to get the password back or nullify the password so that i can see the data of that company

    38. Your Friend says
    06-Apr-2006 at 6:22 pm

  38. Looking at the post on your blog, i feel they assume you can help them with the problems they have with Tally. Suggest mention them that they need to speak to Tally Support for help. Also mention the support details.

    39. manoj kumar gupta says
    07-Apr-2006 at 9:38 am

  39. can you tell me that how i am handal the proble of vat:-

    exp.
    Item Qut. MRP
    abc 1 1000

    Vat4% 40
    sales valu 1040

    but i wannt to sales valu is 1000 & mrp inclusinig in

    40. jeetu says
    08-Apr-2006 at 5:22 pm

  40. helo sir/madam
    i have a tally7.2 multi user pack but every 10 to 15 days latter my server gose in educational mod and my all computers going to be slower.
    pls give me the solution for it .
    wiyh regard .

    41. Hilson says
    10-Apr-2006 at 2:52 pm

  41. we are currently using 7.2 rel 2.1 . when we import transcation file we get an error . I quote the message
    ‘line 367 : The Cost centre ’service-w.I’ does not belong to the category ‘Primary Cost category ‘

    Can anyone help me out.
    Regards…..Hilson

    42. Vinod says
    11-Apr-2006 at 11:24 am

  42. We have Tally 7.2 multiuser software installed on Windows Xp (SP2) machine. Uptil now the clients were able to connect to the system and everything was fine.
    But since yesterday it is showing Tally EDUCATIONAL license on all the clients….
    any clues please?

    Thanks,
    Vinod

    43. PANKAJ BIRLA says
    11-Apr-2006 at 4:53 pm

  43. sir can u help me for opening the tally data file in excel format.
    for this what can i do ??? please tell me.
    Thanks

    44. jomy says
    11-Apr-2006 at 7:20 pm

  44. PLEASE HELP ME i AM UNABLE TO RUN TALLY 7.2 ON WINDOWS 2003 SERVER. MY CLIENT PC SHOWS MESSAGE � LICENCE SERVER IS NOT ACTIVATED� BUT IN BROWSER IS SHOW “TALLY SERVER IS RUNNING�
    HELP ME WHAT TO DO.
    I HAVE INSTALLED THE TALLY WITH ADMINISTRATIVE RIGHTS.

    REGARDS,

    45. placewel system solution pvt. ltd. says
    12-Apr-2006 at 2:22 pm

  45. If we open tally 7.2 the message could not load library import arrives. Please suggest a solution to it as early as possible. the messager error code : 0000000000 problem . serial number not work.

    46. Yogendra says
    12-Apr-2006 at 8:07 pm

  46. Sir,

    I am using Tally 7.2, my people are bymistake change the Financial year and Books starting from in Company alterations.
    When we are opened Tally give the message “COMPANY DATE DETAILS CHANGED. NEED TO REWRITE BEFORE PROCEEDING”. Plz send u r suggestion, it is very urgent.

    Thanking You Sir.

    47. Yogendra says
    12-Apr-2006 at 8:11 pm

  47. Sir,

    We are using Tally 7.2. Bymistake our people are changed the financial year & date in Company alterations. When we are opend Tally gives the message “COMPANY DATE DETAILS CHANGED. NEED TO REWRITE BEFORE PROCEEDING”. Plz give suggestions to me.

    Thanking You Sir

    48. K.Rajarajan says
    15-Apr-2006 at 10:46 am

  48. hello ,
    I am indiarajarajan@gmail.com. i have bought Tally 7.2. I have created supplier and customer names in one company and exported the same to all other companies. i want to take ledger for a particular customer from all companies. is there any option to take multi company ledger like

    ABC company
    Party A Credit Rs.25,000-00
    DEF Company
    Party A Debit Rs.20,000-00
    Net Balance Credit Rs. 5,000-00

    how can i get the above said report? is there any way?

    49. VIVEK GARG says
    15-Apr-2006 at 1:11 pm

  49. HELLO SIR WHILE MAKING SALES ENTERY HOW TO SHOW VAT IN IT AS I AM USING TALLY 7.2
    REPLY SOON
    THANXS

    50. Waseem Sayyed says
    15-Apr-2006 at 3:41 pm

  50. Sir,

    We are using Tally 5.4. release 3 b Bymistake our people are changed the financial year & date in Company alterations. When we are opend Tally gives the message “COMPANY DATE DETAILS CHANGED. NEED TO REWRITE BEFORE PROCEEDING�. Plz give suggestions to me.

    Thanking You Sir

    51. Waseem Sayyed says
    15-Apr-2006 at 3:42 pm

  51. Sir,

    We are using Tally 5.4 release 3 b . Bymistake our people are changed the financial year & date in Company alterations. When we are opend Tally gives the message “COMPANY DATE DETAILS CHANGED. NEED TO REWRITE BEFORE PROCEEDING�. Plz give suggestions to me.

    Thanking You Sir

    52. Waseem Sayyed says
    15-Apr-2006 at 3:43 pm

  52. Sir,

    We are using Tally 7.2. Bymistake our people are changed the financial year & date in Company alterations. When we are opend Tally gives the message “COMPANY DATE DETAILS CHANGED. NEED TO REWRITE BEFORE PROCEEDING�. Plz give suggestions to me.
    Thanking You Sir

    53. ron says
    15-Apr-2006 at 4:36 pm

  53. greetings
    how do you recover data of tally 4.5 from a hard disk in which the files are crosslinked?

    is there any method to rebuild the data plz let me know

    54. bhasker says
    16-Apr-2006 at 10:29 am

  54. this is Bhasker i am using licenced software but i am unable to activate, i mean i formated my system after installed tally i am un able to get serial and also i would like to connect client

    55. Rajesh Nath Goswami says
    17-Apr-2006 at 1:03 am

  55. I want to provide solution in all version of Tally but how it possible me to provide same to the frusted people problems like 1) some one change the date of books begining from 2) Data recovery 3) customise the software according to the user.

    56. Avinash Singh says
    17-Apr-2006 at 4:04 pm

  56. AVinash Singh Gurdaspur Punjab,

    I am using Tally7.2 version and facing the Problem of Data Crashing for regular intervals , its serious problem for us Tell us how to Recover the Tally Data

    Avinash ingh
    Gurdaspur

    57. Kulrar Singh says
    17-Apr-2006 at 4:18 pm

  57. Kultar Singh
    Pathankot

    My Data of 7.2 ver Tally is corrupting very often, what is the procedure to recover data.

    Kultar Singh

    58. Suresh Panchal says
    18-Apr-2006 at 11:18 am

  58. I am receiving INVALID CHARACTER error message when I am trying to do some entry. I am using Tally 7.2. I also tried on Tally 6.1 and 5.4 using Windows XP and Windows 2000.

    Any Sugessions ?

    59. Himanshu Pant says
    18-Apr-2006 at 3:32 pm

  59. hi i am a user of tally 7.2 multiuser what the problem i am facing that usually tally on client machine bacomes educational and gives a massege unable to get licence from licence server. we called up a local vender’s engg for it and he did something but could not solve the problem and said your window has currpedt so you have to formate still we are facing this problem i want to know whether he was right on his statement can it possible .
    [plz suggest me as soon as possible

    60. Hilson says
    18-Apr-2006 at 7:09 pm

  60. hi himanshu pant,

    This is the problem many of the users are facing esp in tally 7.2 ver

    kindly check the following things
    1) Are you able to ping with the server.
    2) If u are using Internet through proxy server , kindly disable it.
    3)check the tally.ini file in c:\tally directory

    ;; ** The following line is required for TallyConnected
    TallyLicense = Connect
    ;; ** If you are running multi-user in client mode use TallyLicenseServer = server ip address:9000
    TallyLockServer = No

    Regards
    Hilson

    61. Hilson says
    18-Apr-2006 at 7:13 pm

  61. Hi ron,

    Contact data recovery expert they will help u out.
    or restore with latest backup and start keying in remaining data.

    U cannot trust tally database …. U must daily take backup of ur database

    regards
    Hilson

    62. prince says
    20-Apr-2006 at 12:48 pm

  62. i am using tally 7.2 multiuser ,data is on 2003 server. when clients running tally it gets vey slow and become hang even they try to save the 2-3 entries.
    wht may be the pbmm? any solution?

    63. Lakshmi Narayanan says
    20-Apr-2006 at 7:00 pm

  63. We are using tally 7.2 multiuser ,data is on 2000 Prof IBM Server. when clients running tally it gets vey slow and become hang even they try to save the 2-3 entries.
    wht may be the pbmm? any solution?

    64. PRASHANT says
    20-Apr-2006 at 7:48 pm

  64. sir,

    Pls tell me how to open inventory account i am having computer hardware as well as software business.

    PRASHANT

    65. Hilson says
    21-Apr-2006 at 9:20 am

  65. Dear Lakshmi,

    copy the data folder from server to any good client PC and check it.
    while doing so please make sure to change the data path in tally.ini file.
    REgards……….Hilson

    66. Karan Rai says
    21-Apr-2006 at 10:29 am

  66. Hi I am using Tally 7.2 Multiuser.

    Tally is working fine in Server but in all the clients its giving message

    Exiting Tally
    Out of Memory.

    Please help me.

    67. aamer khan says
    21-Apr-2006 at 12:24 pm

  67. Sir,

    I am using Tally 7.2, my people are bymistake change the Financial year and Books starting from in Company alterations.
    When we are opened Tally give the message “COMPANY DATE DETAILS CHANGED. NEED TO REWRITE BEFORE PROCEEDING�. Plz send u r suggestion, it is very urgent.

    Thanking You Sir.

    68. Dharmender says
    21-Apr-2006 at 12:36 pm

  68. Hi
    i am using tally 5.4 i forgotten the password used for accessing companies data…
    Can any plz help me how to get the password back or nullify the password so that i can see the data of that company

    69. Lakshminarayan says
    21-Apr-2006 at 1:59 pm

  69. I have tried the same it is still giving the same problem

    70. Mithlesh says
    21-Apr-2006 at 5:27 pm

  70. previously i have upgraded tally from 6.3 to 7.2 v 2.1 its worked fine till 20/4/2006. But today when i started the tally i got the error msg ” Exiting TALLY, Internal Error. Contact tally solution. Software exception c0000005(Memory Access Violaton)”

    Can anybody provide me the help to solve this problem?

    71. Lakshmi Narayan says
    21-Apr-2006 at 5:37 pm

  71. Dear Mithlesh

    By any chance have you installed any new printer or fax after using tally if so remove the same it will start working
    L.Narayan

    72. sadiq says
    22-Apr-2006 at 10:50 am

  72. i’m using tally but unfort. i 4get my password . so i can’t open my company. how can brack password. plz help me.

    73. naveen bhandari says
    22-Apr-2006 at 1:14 pm

  73. i am very greatful to have tally software.It solves every problem relating to accounting and management.My clients are also thankful for this.

    74. naveen bhandari says
    22-Apr-2006 at 1:34 pm

  74. i don’t know what is the procedure to create payroll using windows based TALLY system?plz help me.

    75. Rahul Kapasi says
    22-Apr-2006 at 5:10 pm

  75. In types of security options we need to block users by deletion of voucher entry .Please help urgent

    76. Amit says
    24-Apr-2006 at 1:24 pm

  76. Dear Sir

    I want the complete address details of Sundry debtors/creditors

    in one page print out.

    77. amol rugge says
    24-Apr-2006 at 5:14 pm

  77. sir i have receipt & payment account for the year endingso pls. give any information about that,

    78. pramod says
    25-Apr-2006 at 12:04 pm

  78. i want to connect two pc to Tally 63 (Multiuser). when l connected the pc, tally is opening but not getting the company details. how to give the path to main tally server plz help as soon as possible

    79. arvind kumar says
    25-Apr-2006 at 1:04 pm

  79. can data be transfered from Excel to tally 7.2. i have a stock list containing more than 500 contractor’s name. pls solve my problem

    80. arvind kumar says
    25-Apr-2006 at 1:10 pm

  80. sir can u help me for opening the tally data file in excel format.
    for this what can i do ??? please tell me.
    Thanks

    81. vijay says
    28-Apr-2006 at 11:16 am

  81. dear sir/madam,
    By mistake my friends change my company year date in tally, how it is possible this date. mail me ASAP. Exact message is
    Exiting Tally
    “Company date details need to Rewrite before proceedings.
    Regards
    Vijay
    University of Delhi.

    82. zameer says
    29-Apr-2006 at 2:46 pm

  82. memory access violetion problem

    83. SMARTSANGEETH says
    30-Apr-2006 at 4:41 pm

  83. Hai guy’s my name is SMART.My friends calls me like that.
    I red your problems.Now I am going to give you some tips about tally 7.2

    ANSWER FOR:- Exiting TALLY, Internal Error. Contact tally solution. Software exception c0000005(Memory Access Violaton)�
    CLOSE THE TALLY APPLICATION
    DELETE OR RENAME THE FILE ” MSGKEEP.TSM ”

    if you have any doubts about tally you just send an email to me I will assist you. Note that I am not any tally authorized person. I am only a user(HELPER).

    84. amit says
    01-May-2006 at 11:37 am

  84. i forget user name and password can i save my data

    85. Waseem says
    01-May-2006 at 12:37 pm

  85. SMARTSANGEETH ”
    We are using Tally 5.4. release 3 b Bymistake our people are changed the financial year & date in Company alterations. When we are opend Tally gives the message “COMPANY DATE DETAILS CHANGED. NEED TO REWRITE BEFORE PROCEEDING�. Plz give suggestions to me.

    Thanking You Sir

    wow2ali@rediffmail.com

    86. runa says
    03-May-2006 at 12:53 pm

  86. I don’t knowwhat is the procedure to charge carriage under sales bill in7.2 version.Calculation should be made( product total+ carriage)x4%.

    87. Amit says
    04-May-2006 at 10:05 am

  87. Hello,

    I am using Tally 7.2 and want to import transactions from another file from another software. I want to know exact space given for each columns, and total nos of columns with little description about then like type of Transactions in short form.

    88. jomon thomas says
    05-May-2006 at 3:43 pm

  88. Hi
    i am using tally 5.4 i forgotten the password used for accessing companies data…
    Can any plz help me how to get the password back or nullify the password so that i can see the data of that company

    89. jomon thomas says
    05-May-2006 at 3:43 pm

  89. Hello sir,

    i am using tally 5.4 i forgotten the password used for accessing companies data…and
    Can any plz help me how to get the password back or nullify the password so that i can see the data of that company

    90. joe says
    05-May-2006 at 3:52 pm

  90. joe here;
    i am a user of tally 7.2 multiuser with windows xp platform s.pack 2 ,what the problem i am facing that usually tally on client machine bacomes educational and gives a massege unable to get licence from licence server. [plz suggest me as soon as possible

    91. sandeep says
    05-May-2006 at 5:57 pm

  91. when i opening tally i recieived an error message (internal erroe c0000005 memory access voilation ) what can i do for this

    92. mehra says
    05-May-2006 at 9:25 pm

  92. i have tally 4.3 now i installed 6.3 how i can bring my old data from 4.3 to 6.3

    93. mehra says
    05-May-2006 at 9:26 pm

  93. have tally 4.3 now i installed 6.3 how i can bring my old data from 4.3 to 6.3

    94. hari says
    05-May-2006 at 11:31 pm

  94. sir,

    i am unable to share tally 7.2 on my client systems i have 2000 server and clients are win 98.i install tally on my server then what is process to configure tally on my client systems.

    please give me full details about how to configure tally on clients side.

    95. devang desai says
    07-May-2006 at 12:17 pm

  95. i m unable to run tally 5.4 on my windows 98se when i run tally 5.4 it opens the window and it immediately gets shutdown.
    kindly give me the solution for it

    96. Shiva says
    08-May-2006 at 3:15 pm

  96. when i opening tally i recieived an error message (internal erroe c0000005 memory access voilation ) what can i do for this

    97. Instruments & Equipments says
    09-May-2006 at 11:59 am

  97. Dear Sir,
    I am a user of tally 6.3 singleuser. Now I have installed Windows XP Professional and install Tally 6.3. My Problem I Can able to printout in Epson Dot Matrix Printer 10×12 Size (10 Inch Width and 12 Inch Height). I had create/Select 10×12 custom property, but i have getting error message “Exiting Tally Error in TDL Form printed invoice Vertical Page Breaks are too big” How to rectify.
    Kindly Give me the solution for it

    98. Instruments & Equipments says
    09-May-2006 at 12:00 pm

  98. Dear Sir,
    I am a user of tally 6.3 singleuser. Now I have installed Windows XP Professional and install Tally 6.3. My Problem I Can not able to printout in Epson Dot Matrix Printer 10×12 Size (10 Inch Width and 12 Inch Height). I had create/Select 10×12 custom property, but i have getting error message “Exiting Tally Error in TDL Form printed invoice Vertical Page Breaks are too big” How to rectify.
    Kindly Give me the solution for it

    99. Rishabh says
    10-May-2006 at 9:08 am

  99. exiting Tally!
    Company date datails changed.
    Need to rewrite before proceeding.

    100. Rishabh Jain says
    10-May-2006 at 9:09 am

  100. exiting Tally!
    Company date datails changed.
    Need to rewrite before proceeding.

    101. Chintu Jain says
    10-May-2006 at 9:11 am

  101. exiting Tally!
    Company date datails changed.
    Need to rewrite before proceeding.

    102. Instruments & Equipments says
    10-May-2006 at 10:31 am

  102. Dear Sir,
    I am a user of tally 6.3 singleuser. Now I have installed Windows XP Professional and install Tally 6.3.
    How to configure tally63 with printout 10inch width and 12inch Height in Win XP platform.
    Kindly Give me the solution for it.

    103. Lakshmi Narayanan says
    10-May-2006 at 1:30 pm

  103. Can any one tell me if online backup can be taken in tally

    104. Dhiren says
    11-May-2006 at 1:51 pm

  104. Need any help on Tally?

    Contact us at support@4qs.in

    105. ramesh says
    11-May-2006 at 11:24 pm

  105. dear sir,
    I am using tally 7.2 .I want to know about commission sales

    106. ramesh says
    11-May-2006 at 11:45 pm

  106. pls how to crate consignment purchase and sales

    107. ehtesham says
    12-May-2006 at 9:41 am

  107. we are using your licenced tally version 7.2, and we have no access to open or alter vouchers (because of company policy) so can able to print vouchers without open it (if we go to multi print option in tally it prints all vouchers of the date, while we may want to print only one voucher of the particular date).
    pls advice soon on my email address
    thanking you
    prime international

    108. Prasad says
    12-May-2006 at 12:48 pm

  108. Mr. Ehtesham (Prime International)

    there is a TDL for this if u can give ur email id i could forward it to u this allows u to open the voucher and print but does not allow to alter any voucher and also voucher wise security control can be given
    This is my e-id jprasad_128@yahoo.com

    Thanks
    Prasad

    109. M L Suhashini says
    12-May-2006 at 4:12 pm

  109. not able to run tally pleas help ours is tally 7.2

    110. Shadab says
    12-May-2006 at 9:50 pm

  110. I am using Tally 7.2, bymistake Financial year changed and Books starting from in Company alterations.
    When we are opened Tally give the message “COMPANY DATE DETAILS CHANGED. NEED TO REWRITE BEFORE PROCEEDING�. Plz send u r suggestion, it is very very urgent.

    regards
    shadab

    111. Gayathri says
    13-May-2006 at 4:49 pm

  111. Hi,

    I am using Tally 5.4, while taking backup of company it showing error “could not complete”. Please help me ASAP.

    112. gopal says
    13-May-2006 at 10:38 pm

  112. sir i have problem in tally 7.2 to maintain inventory with two diffrent
    rate of vat eg:12.5% or 4 % in one voucher please help me!

Sorry, the comments are disabled for this post.

« Cablewallahs = chors Bcentral Customer Support »

Feeds

Search

Categories

Archives

Links